The smallest of the ProX DMP line, the ProX DMP 100 is designed as the entry point to 3D printed metal manufacturing of small, complex fine detail metal parts at high quality using Direct Metal Printing (DMP). The ProX DMP 100 features a build volume of 100 x 100 x 100 mm (3.94 x 3.94 x 3.94 in) along with manual material loading and an optional, atmospheric controlled, external recycling station. The system supports Stainless 17-4PH and CoCr.
Finest details, thinnest wall thicknesses
3D Systems’ patented layer compacting technology allows using smaller particles, which in turn helps to generate finest feature detail available in the market and thinnest possible wall thicknesses
Best surface finish, less supports
With a surface finish quality of up to 5 Ra μm (200 Ra micro inches) less post-processing is required and sharpest corner radiuses are achieved. Due to the proprietary powder deposition system, the ProX DMP 100 builds down to 20° angles without supports. All overhanging surfaces benefit from this much better surface quality compared to competing machines. Less supports and improved surface quality ultimately mean less post processing and less material usage – saving time and cost. In addition, you can build parts which are difficult to achieve with other printers.
Outstanding accuracy and repeatability
The typical accuracy on our small metal parts is +/- 50 μm (+/- 0.002 inches), on large parts +/- 0.2%. Repeatability from part to part is approximately 20 μm (0.0008 inches).
Which 3D Printer is Right For You?
Find the perfect printer for your needs with the 3D Printer Buyer's Guide.